263 research outputs found
A Study of Coherent Radiation Generated in an Ablative Capillary Discharge
Feasible soft-X-ray amplification in the CVI and NVII Balmer transition is investigated in a capillary discharge. The best conditions and parameters for the experimental set-up are found for an ablative capillary. The most optimistic results have shown that the gain would be greater than one, which is the condition for successful ASE (Amplified spontaneous emission) in capillary discharges. The capillary discharge evolution is modeled using the NPINCH program, employing a one-dimensional physical model based on MHD equations. The information about the capillary discharge evolution is processed in the FLY, FLYPAPER, FLYSPEC programs, enabling the population to be modeled on specific levels during capillary discharge
Calibration of indirect methods for maesurement of properties of alkali activated concretes
Práce se zabývá tvorbou kalibračních vztahů pro stanovení pevnosti v tlaku, dynamického a statického modulu pružnosti alkalicky aktivovaného betonu pomocí nepřímých (nedestruktivních) metod. O alkalicky aktivovaných betonech se pojednává jako o relativně novém materiálu použitém ve stavebnictví. Vykazují jiné vlastnosti než betony na bázi portlandského cementu. Proto se tedy modifikace obecného kalibračního vztahu jeví jako nezbytná. Čerstvý beton byl vyroben v provozu ŽPSV a.s., v závodě Uherský Ostroh ve třech směsích a vždy v počtu 18 krychlí a 3 trámce. Vzorky byly zkoušeny tvrdoměry Schmidt typu L a typu N, SilverSchmidt PC-N a ultrazvukem v 6 časových etapách po 3 tělesech. Poté byla stanovena pevnost v tlaku na krychlích. Statický modul pružnosti na hranolech byl stanoven ve stáří 28 dnů. Výsledkem jsou kalibrační vztahy pro stanovení vývoje pevnosti v tlaku a modulu pružnosti pro jednotlivé metody i jejich vzájemnou kombinaci.This work solves creation of calibration relations to determine cube compressive strength, dynamic and static elastic modulus of alkali-activated concrete by non-destructive methods. Alkali-activated concrete is spoken of as a new material used in civil engineering. It shows different properties than normal concrete based on Portland cement. That's why the modification of common calibration relation seems necessary. Fresh concrete was made in the concrete plan ŽPSV a.s., Uherský Ostroh in three mixtures and always in the number of 18 cubes and 3 prisms. The samples were tested by impact hammer Schmidt type L, type N, SilverSchmidt PC-N and by ultrasound in 6 time periods of three specimens. After that, the cube compressive strength was determined. Status of static elastic modulus was determined in a time period of 28 days. The results are calibration relations to determine the progress of compressive strength and modulus of elasticity for each method and their combination.
A review of architectures and concepts for intelligence in future electric energy system
Renewable energy sources are one key enabler to decrease greenhouse gas emissions and to cope with the anthropogenic climate change. Their intermittent behavior and limited storage capabilities present a new challenge to power system operators to maintain power quality and reliability. Additional technical complexity arises from the large number of small distributed generation units and their allocation within the power system. Market liberalization and changing regulatory framework lead to additional organizational complexity. As a result, the design and operation of the future electric energy system have to be redefined. Sophisticated information and communication architectures, automation concepts, and control approaches are necessary in order to manage the higher complexity of so-called smart grids. This paper provides an overview of the state of the art and recent developments enabling higher intelligence in future smart grids. The integration of renewable sources and storage systems into the power grids is analyzed. Energy management and demand response methods and important automation paradigms and domain standards are also reviewed.info:eu-repo/semantics/publishedVersio
MRS Drone: A Modular Platform for Real-World Deployment of Aerial Multi-Robot Systems
This paper presents a modular autonomous Unmanned Aerial Vehicle (UAV)
platform called the Multi-robot Systems (MRS) Drone that can be used in a large
range of indoor and outdoor applications. The MRS Drone features unique
modularity with respect to changes in actuators, frames, and sensory
configuration. As the name suggests, the platform is specially tailored for
deployment within a MRS group. The MRS Drone contributes to the
state-of-the-art of UAV platforms by allowing smooth real-world deployment of
multiple aerial robots, as well as by outperforming other platforms with its
modularity. For real-world multi-robot deployment in various applications, the
platform is easy to both assemble and modify. Moreover, it is accompanied by a
realistic simulator to enable safe pre-flight testing and a smooth transition
to complex real-world experiments. In this manuscript, we present mechanical
and electrical designs, software architecture, and technical specifications to
build a fully autonomous multi UAV system. Finally, we demonstrate the full
capabilities and the unique modularity of the MRS Drone in various real-world
applications that required a diverse range of platform configurations.Comment: 49 pages, 39 figures, accepted for publication to the Journal of
Intelligent & Robotic System
Search for charginos in e+e- interactions at sqrt(s) = 189 GeV
An update of the searches for charginos and gravitinos is presented, based on
a data sample corresponding to the 158 pb^{-1} recorded by the DELPHI detector
in 1998, at a centre-of-mass energy of 189 GeV. No evidence for a signal was
found. The lower mass limits are 4-5 GeV/c^2 higher than those obtained at a
centre-of-mass energy of 183 GeV. The (\mu,M_2) MSSM domain excluded by
combining the chargino searches with neutralino searches at the Z resonance
implies a limit on the mass of the lightest neutralino which, for a heavy
sneutrino, is constrained to be above 31.0 GeV/c^2 for tan(beta) \geq 1.Comment: 22 pages, 8 figure
Hadronization properties of b quarks compared to light quarks in e+e- -> q qbar from 183 to 200 GeV
The DELPHI detector at LEP has collected 54 pb^{-1} of data at a
centre-of-mass energy around 183 GeV during 1997, 158 pb^{-1} around 189 GeV
during 1998, and 187 pb^{-1} between 192 and 200 GeV during 1999. These data
were used to measure the average charged particle multiplicity in e+e- -> b
bbar events, _{bb}, and the difference delta_{bl} between _{bb} and the
multiplicity, _{ll}, in generic light quark (u,d,s) events: delta_{bl}(183
GeV) = 4.55 +/- 1.31 (stat) +/- 0.73 (syst) delta_{bl}(189 GeV) = 4.43 +/- 0.85
(stat) +/- 0.61 (syst) delta_{bl}(200 GeV) = 3.39 +/- 0.89 (stat) +/- 1.01
(syst). This result is consistent with QCD predictions, while it is
inconsistent with calculations assuming that the multiplicity accompanying the
decay of a heavy quark is independent of the mass of the quark itself.Comment: 13 pages, 2 figure
Search for supersymmetric particles in scenarios with a gravitino LSP and stau NLSP
Sleptons, neutralinos and charginos were searched for in the context of
scenarios where the lightest supersymmetric particle is the gravitino. It was
assumed that the stau is the next-to-lightest supersymmetric particle. Data
collected with the DELPHI detector at a centre-of-mass energy near 189 GeV were
analysed combining the methods developed in previous searches at lower
energies. No evidence for the production of these supersymmetric particles was
found. Hence, limits were derived at 95% confidence level.Comment: 31 pages, 14 figure
Measurement of the gluon fragmentation function and a comparison of the scaling violation in gluon and quarks jets
The fragmentation functions of quarks and gluons are measured in various three-jet topologies in Z decays from the full data set collected with the Delphi detector at the Z resonance between 1992 and 1995. The results at different values of transverse momentum-like scales are compared. A parameterization of the quark and gluon fragmentation functions at a fixed reference scale is given. The quark and gluon fragmentation functions show the predicted pattern of scaling violations. The scaling violation for quark jets as a function of a transverse momentum-like scale is in a good agreement with that observed in lower energy e+e− annihilation experiments. For gluon jets it appears to be significantly stronger. The scale dependences of the gluon and quark fragmentation functions agree with the prediction of the DGLAP evolution equations from which the colour factor ratio CA/CF is measured to be: CACF=2.26±0.09stat.±0.06sys.±0.12clus.,scale
- …